Brief:Top shell is the frame for LCD display like iPad. 5 molds for 9 plastic parts. two versions of phone station. Many holes for the speaker and venting/heat sink. 14 pcs of M3 brass inserts molded directly in the top shell. 400-ton injection machine for the bottom shell. Small volume per batch.
Brief:4 molds for this product, 7 plastic parts. The speaker plate is covered with the cloth. Nice texture around the surfaces of the enclosure. 250-ton machine for the top and bottom shells. Pack together to deliver, batch size 2000 sets. We have 20 variant injection machines with capacity range from 90 tons up to 1000 tons equipped with the robots for automatic production.
Brief:This small box has 6 different kinds of the cover shared the same base (bottom shell) assembled together with the push-in hinge RF shield coating inside, silk screen for different covers silicone gasket installed for delivery. 250-injection machine for molding production, small batch quantity.
Brief:Smart product design, three different parts, The enclosure could be one layer or two layers, The white mid-frame part is stackable, the top and bottom parts are same. 4 pcs of M3 brass inserts in the posts by hot melt pressing process. Three molds, 1000 sets per batch, assembly together for delivery.
Brief:This enclosure consists of 5 plastic parts. Three blue, one grey and one transparent component. 2-cavity mold for the clear one, and one cavity mold each for other pieces. Batch size 1000 sets, assemble together for delivery. 90-ton injection machine for the LED guide part, and 160-ton machine for other units.
Brief:This box has two plastic parts Lid and Base (bottom shell) which are assembled together by a stainless steel pin/hinge. One mold for the lid, the other for the base part. 6 pcs of 6-32 brass nuts insert molded in the lid, 18 pcs of 6-32 nuts and 2 pcs 8-32 nuts in the base. 7 steps silk screen for the lid, RF shield coating inside, and the silicone gasket assembled to be water-tight. The lid has 5 versions which in one mold with the interchangeable inserts to save the costs. 350-ton injection machine for molding, and then printing, coating and assembly for delivery.